View Single Post
Old May 28th, 2001, 02:50 PM   #5
Jason Reiser
Posts: n/a
Yup - hack it!

If you ground pin #15 on the relay, it thinks that the parking brake is on. I soldered a short wire with a quick connector on it to pin #15, and then connected this to a convenient ground. This way I can easily remove this hack and return the stock unmodified relay if necessary.

If you want a dash mounted switch, just put it in series on this wire to ground.

And while you're there, remove pin #18 to allow the top to operate while the car is moving. 8)

  Reply With Quote